IMI-2502 Hydrotherapy Bath Pool

IMI-2502  HYDROTHERAPY TANK (Butterfly Shape Bath Pool)

Butterfly Shaped, Hydrotherapy Bath Pool is designed for permanent installations with direct connections to Hot & Cold water supply, Overflow and Drainage. The shape & dimensions of the tank allow various arm & leg exercises to be carried out without hitting to the sides. The recessed areas at the head and sides of the bath provide good access for the therapist when monitoring & assisting the patient


  • Construction: Constructed of heavy stainless steel sheet (2mm & 1.5mm thick), electrically Argon welded tank is shaped to Butterfly modified figure.
  • Overall dimension: 266cm x 196cm x 86cm high.
  • Inside dimension: Length to inset 218cm. Width upper part 183cm. Width of middle narrow part 89cm.  Width of the lower part is 135cm. The depth is 56cm.
  • Turbine: Two, Turbine Ejector-Aerator are powered by the vertically mounted 1/2 hp electric motor & mounted on a spring-loaded turbine elevator for height adjustment
  • Turbine Carriages.: TWO carriages fitted with ball bearings for easy movement of Turbines around the tank.
  • Power Supply: 220 V AC.
  • Accessories: One digital thermometer, 2 water inlets, drain and overflow pipes with all necessary fitting. Adjustable Stainless Steel Head-Rest, - Stainless Steel Body Stretcher and Sitting seat fitted with nylon cloth.
  • Finish: Bright polish finish inside the tank with special paint finish from outside.
  • Note: A separate room or hall is required for this unit with 220V AC power supply, Hot & Cold water supply and water drainage.